Engineered antifouling microtopographies - effect of feature size, geometry, and roughness on settlement of zoospores of the green alga Ulva

The effect of feature size, geometry, and roughness on the settlement of zoospores of the ship fouling alga Ulva was evaluated using engineered microtopographies in polydimethylsiloxane elastomer. The topographies studied were designed at a feature spacing of 2 microm and all significantly reduced spore settlement compared to a smooth surface. An indirect correlation between spore settlement and a newly described engineered roughness index (ERI) was identified. ERI is a dimensionless ratio based on Wenzel's roughness factor, depressed surface fraction, and the degree of freedom of spore movement. Uniform surfaces of either 2 mum diameter circular pillars (ERI=5.0) or 2 microm wide ridges (ERI=6.1) reduced settlement by 36% and 31%, respectively. A novel multi-feature topography consisting of 2 mum diameter circular pillars and 10 microm equilateral triangles (ERI=8.7) reduced spore settlement by 58%. The largest reduction in spore settlement, 77%, was obtained with the Sharklet AF topography (ERI=9.5).     

Investigation of the role of hydrophilic chain length in amphiphilic perfluoropolyether/poly(ethylene glycol) networks: towards high-performance antifouling coatings

The facile preparation of amphiphilic network coatings having a hydrophobic dimethacryloxy-functionalized perfluoropolyether (PFPE-DMA; M(w) = 1500 g mol(-1)) crosslinked with hydrophilic monomethacryloxy functionalized poly(ethylene glycol) macromonomers (PEG-MA; M(w) = 300, 475, 1100 g mol(-1)), intended as non-toxic high-performance marine coatings exhibiting antifouling characteristics is demonstrated. The PFPE-DMA was found to be miscible with the PEG-MA. Photo-cured blends of these materials containing 10 wt% of PEG-MA oligomers did not swell significantly in water. PFPE-DMA crosslinked with the highest molecular weight PEG oligomer (ie PEG1100) deterred settlement (attachment) of algal cells and cypris larvae of barnacles compared to a PFPE control coating. Dynamic mechanical analysis of these networks revealed a flexible material. Preferential segregation of the PEG segments at the polymer/air interface resulted in enhanced antifouling performance. The cured amphiphilic PFPE/PEG films showed decreased advancing and receding contact angles with increasing PEG chain length. In particular, the PFPE/PEG1100 network had a much lower advancing contact angle than static contact angle, suggesting that the PEG1100 segments diffuse to the polymer/water interface quickly. The preferential interfacial aggregation of the larger PEG segments enables the coating surface to have a substantially enhanced resistance to settlement of spores of the green seaweed Ulva, cells of the diatom Navicula and cypris larvae of the barnacle Balanus amphitrite as well as low adhesion of sporelings (young plants) of Ulva, adhesion being lower than to a polydimethyl elastomer, Silastic T2.     

Antibiotic dosing in the 'at risk' critically ill patient: Linking pathophysiology with pharmacokinetics/pharmacodynamics in sepsis and trauma patients

Background

Critical illness, mediated by trauma or sepsis, can lead to physiological changes that alter the pharmacokinetics of antibiotics and may result in sub-therapeutic concentrations at the sites of infection. The first aim of this project is to identify the clinical characteristics of critically ill patients with significant trauma that have been recently admitted to ICU that may predict the dosing requirements for the antibiotic, cefazolin. The second aim of this is to identify the clinical characteristics of critically ill patients with sepsis that may predict the dosing requirements for the combination antibiotic, piperacillin-tazobactam.

Methods/Design

This is an observational pharmacokinetic study of patients with trauma (cefazolin) or with sepsis (piperacillin-tazobactam). Participants will have samples from blood and urine, collected at different intervals. Patients will also have a microdialysis catheter inserted into subcutaneous tissue to measure interstitial fluid penetration of the antibiotic. Participants will be administered sinistrin, indocyanine green and sodium bromide as well as have cardiac output monitoring performed and tetrapolar bioimpedance to determine physiological changes resulting from pathology. Analysis of samples will be performed using validated liquid chromatography tandem mass-spectrometry. Pharmacokinetic analysis will be performed using non-linear mixed effects modeling to determine individual and population pharmacokinetic parameters of antibiotics.

Discussion

The study will describe cefazolin and piperacillin-tazobactam concentrations in plasma and the interstitial fluid of tissues in trauma and sepsis patients respectively. The results of this study will guide clinicians to effectively dose these antibiotics in order to maximize the concentration of antibiotics in the interstitial fluid of tissues.     

The relation between cartilage biomarkers (C2C,C1,2C,CS846, and CPII) and the long-term outcome of rheumatoid arthritis patients within the CAMERA trial

Introduction  

The aim of this study was to investigate whether serum biomarker levels of C2C, C1,2C, CS846, and CPII can predict the long-term course of disease activity and radiographic progression early in the disease course of rheumatoid arthritis (RA).     

ANALYSIS OF EXPRESSED SEQUENCE TAGS FROM THE GREEN ALGA ULVA LINZA (CHLOROPHYTA)1

There is a general lack of genomic information available for chlorophyte seaweed genera such as Ulva, and in particular there is no information concerning the genes that contribute to adhesion and cell wall biosynthesis for this organism. Partial sequencing of cDNA libraries to generate expressed sequence tags (ESTs) is an effective means of gene discovery and characterization of expression patterns. In this study, a cDNA library was created from sporulating tissue of Ulva linza L. Initially, 650 ESTs were randomly selected from a cDNA library and sequenced from their 5′ ends to obtain an indication of the level of redundancy of the library (21%). The library was normalized to enrich for rarer sequences, and a further 1920 ESTs were sequenced. These sequences were subjected to contig assembly that resulted in a unigene set of approximately 1104 ESTs. Forty‐eight percent of these sequences exhibited significant similarity to sequences in the databases. Phylogenetic comparisons are made between selected sequences with similarity in the databases to proteins involved in aspects of extracellular matrix/cell wall assembly and adhesion.     

Hybrid xerogel films as novel coatings for antifouling and fouling release

Hybrid sol-gel-derived xerogel films prepared from 45/55 (mol ratio) n-propyltrimethoxysilane (C3-TMOS)/tetramethylorthosilane (TMOS), 2/98 (mol ratio) bis[3-(trimethoxysilyl)propyl]-ethylenediamine (enTMOS)/tetraethylorthosilane (TEOS), 50/50 (mol ratio) n-octyltriethoxysilane (C8-TEOS)/TMOS, and 50/50 (mol ratio) 3,3,3-trifluoropropyltrimethoxysilane (TFP-TMOS)/TMOS were found to inhibit settlement of zoospores of the marine fouling alga Ulva (syn. Enteromorpha) relative to settlement on acid-washed glass and give greater release of settled zoospores relative to glass upon exposure to pressure from a water jet. The more hydrophobic 50/50 C8-TEOS/TMOS xerogel films had the lowest critical surface tension by comprehensive contact angle analysis and gave significantly greater release of 8-day Ulva sporeling biomass after exposure to turbulent flow generated by a flow channel than the other xerogel surfaces or glass. The 50/50 C8-TEOS/TMOS xerogel was also a fouling release surface for juveniles of the tropical barnacle Balanus amphitrite. X-ray photon electron data indicated that the alkylsilyl residues of the C3-TMOS-, C8-TEOS-, and TFP-TMOS-containing xerogels were located on the surface of the xerogel films (in a vacuum), which contributes to the film hydrophobicity. Similarly, the amine-containing silyl residues of the enTMOS/TEOS films were located at the surface of the xerogel films, which contributes to the more hydrophilic character and increased critical surface tension of these films.     

Effect of Marine Bacterial Isolates on the Growth and Morphology of Axenic Plantlets of the Green Alga Ulva linza

The green marine macroalga, Ulva linza, adopts an “atypical” form when grown in the absence of bacteria. Twenty unique strains of periphytic bacteria, isolated from three species of Ulva, were identified by 16S rDNA sequencing. These isolates were assessed for their effect on the growth and morphological development of axenic plantlets of U. linza. Results showed that the effect of bacterial strains was strain- but not taxon-specific. Thirteen isolates returned the aberrant morphology to normal and of these, five also significantly increased growth rate. One isolate increased growth, but had no effect on morphology. Biofilms of some of these isolates stimulated the settlement of Ulva zoospores but there was no correlation between bacterial isolates that stimulated zoospore settlement and those that initiated changes in morphology and/or growth of the cultured alga.     

Conditioning of surfaces by macromolecules and its implication for the settlement of zoospores of the green alga Ulva linza

Conditioning, ie the adsorption of proteins and other macromolecules, is the first process that occurs in the natural environment once a surface is immersed in seawater, but no information is available either regarding the conditioning of surfaces by artificial seawater or whether conditioning affects data obtained from laboratory assays. A range of self-assembled monolayers (SAMs) with different chemical terminations was used to investigate the time-dependent formation of conditioning layers in commercial and self-prepared artificial seawaters. Subsequently, these results were compared with conditioning by solutions in which zoospores of the green alga Ulva linza had been swimming. Spectral ellipsometry and contact angle measurements as well as infrared reflection absorption spectroscopy (IRRAS) were used to reveal the thickness and chemical composition of the conditioning layers. The extent that surface preconditioning affected the settlement of zoospores of U. linza was also investigated. The results showed that in standard spore settlement bioassays (45-60 min), the influence of a molecular conditioning layer is likely to be small, although more substantial effects are possible at longer settlement times.     

Selective deuteration of tryptophan and methionine residues in maltose binding protein: a model system for neutron scattering

We describe methods that have been developed within the ILL-EMBL Deuteration Laboratory for the production of maltose binding protein (MBP) that has been selectively labelled either with deuterated tryptophan or deuterated methionine (single labelling), or both (double labelling). MBP is used as an important model system for biophysical studies, and selective labelling can be helpful in the analysis of small-angle neutron scattering (SANS) data, neutron reflection (NR) data, and high-resolution neutron diffraction data. The selective labelling was carried out in E. coli high-cell density cultures using auxotrophic mutants in minimal medium containing the required deuterated precursors. Five types of sample were prepared and studied: (1) unmodified hydrogenated MBP (H-MBP), (2) perdeuterated MBP (D-MBP), (3) singly labelled MBP with the tryptophan residues deuterated (D-trp MBP), (4) singly labelled MBP with methionine residues deuterated (D-met MBP) and (5) doubly labelled MBP with both tryptophan and methionine residues deuterated (D-trp/met MBP). Labelled samples were characterised by size exclusion chromatography, gel electrophoresis, light scattering and mass spectroscopy. Preliminary small-angle neutron scattering (SANS) experiments have also been carried out and show measurable differences between the SANS data recorded for the various labelled analogues. More detailed SANS experiments using these labelled MBP analogues are planned; the degree to which such data could enhance structure determination by SANS is discussed.